New SE47 FM (4B5) Vibratory Screed For Sale in Georgia

Standard Weight 6073 lb

Standard Paving Range 2.4 - 4.7 m (8' - 15' 6")

Maximum Paving Width 20.5 ft

Maximum Paving Depth 10 in

Heating Time - Maximum Width 25 minutes

Heating Time - Standard Width 15 minutes

Crown Range -5% to +10%

Vibratory Speed Range 0 to 3000 vpm

Extender Height Range -41 mm to +6.25 mm

Extender Slope Range 0% to 9%

Minimum Width - Endgates Attached 102 in

Transport Length - Tractor and Screed 18.1 ft

Screed Plates Width, Front to Back, Main Screed 24 in

Screed Plates Width, Front to Back, Extenders 9 in

Length - Front to Back, Endgates Attached 86 in

Length - Front to Back, Endgates Removed 59 in

The standard paving range of 2.44 m - 4.7 m (8' - 15' 6") and maximum width of 6.25 m (20' 6") provides a balance between urban and highway paving applications.
Common applications include parking lots, urban and rural roads, subdivision streets, and highways
Front-mounted extenders make maneuvering around abstacles easy by providing the ability to retract without first clearing material from the extender
Power berm options provide the ability to create a 305 mm (12") or 457 mm (18") wide berms with a variable height up to 102 mm (4")

Screed operating consoles are equipped with mix height adjustment for the augers, providing the ability to modify material flow. When equipped with Cat® Grade Control, conveyor ratio adjustment or conveyor material height can be performed through the display
Exclusive trailing edge screed plate adjusters help maintain an even plane across the width of the screed in order to improve paving quaility and extend screed plate life
Extender angle of attack is easily accessible from the top of the extender frame
Inner and outer strike-off adjustments are connected to provide single point modification that ensures equal adjustment across the width of the screed
Slope stops help maintain performance

Screed plate widths of 610 mm (24") on the main and 210 mm (9") on the extenders provide smooth flow
Heated end gate option improves material flow for enhanced longitudinal joints
The in-line extension cylinders and rigid frame design reduces deflection in the extenders for better mat quality

Screed plate heating in as little as 25 minutes to 130º C (266º F)
Exclusive zone monitoring allows heating to continue in the event of a temperature sensor failure
Durable heating elements combined with zone monitoring helps ensure even heat distribution and smooth asphalt textures

Proportional extender control provides smooth adjustment when transitioning paving widths
Screed operating consoles are equipped with mix height dial for the augers and conveyors, providing the ability to modify material flow
Power controls for extender slope and height enables operators to quickly manage mat angles and surface textures

Independent feeder system control includes manual and pause functions for each auger and conveyor
Emergency engine stop feature
Simple tow-point and berm attachment adjustments can be easily made with good visibility from the remote position

Factory-integrated guidance system that helps remove irregularities from the surface and control mat thickness for increased production, lower operating costs, and higher profitability
User-friendly system with text-based displays, split screen-mode, and on-the-go sensor selection
Precise control driven by 10-point auto-calibration, true averaging with 5 transducers in each sensor, and cross-coupling feature that maintains elevation with height adjustment

Paver and screed service and repair kits include the parts necessary to complete specific repairs
Cat genuine parts are manufactured to precise specifications and designed for optimal performance and maximum uptime
Repair kits are identified by a single part number to make ordering easy
Select kits are available to be packaged as a kit by the dealer for over the counter purchases or through the dealer service shop