New 226D3 Skid Steer Loader For Sale in Georgia

Engine

Gross Power - SAE J1995 67.1 hp

Net Power - SAE 1349 65.8 hp

Displacement 134.3 in³

Stroke 3.9 in

Bore 3.3 in

Engine Model Cat C2.2 CRDI

Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf

Net Power - ISO 9249 66.5 hp

Operating Specifications

Rated Operating Capacity 1550 lb

Rated Operating Capacity with Optional Counterweight 1650 lb

Tipping Load 3100 lb

Breakout Force - Tilt Cylinder 3927 lb

Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Weights

Operating Weight 5849 lb

Dimensions

Wheel Base 41.5 in

Length - With Bucket on Ground 127.3 in

Length - Without Bucket 99.4 in

Height - Top of Cab 79.8 in

Vehicle Width over Tires 58.9 in

Maximum Overall Height 143.8 in

Bucket Pin Height - Maximum Lift 110.9 in

Bucket Pin Height - Carry Position 8.5 in

Reach - Maximum Lift/Dump 21 in

Clearance at Maximum Lift and Dump 81.8 in

Ground Clearance 6.9 in

Departure Angle 27.9°

Maximum Dump Angle 46.7°

Rack Back Angle - Maximum Height 88.9°

Bumper Overhang - Behind Rear Axle 35.2 in

Turning Radius from Center - Bucket 77.8 in

Maximum Reach - With Arms Parallel to Ground 50.7 in

Turning Radius from Center - Machine Rear 59.6 in

Turning Radius from Center - Coupler 43.5 in

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336 psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33.5 hp

Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 hp

Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26 gal/min

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - One Speed 7.6 mile/h

Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h

Service Refill Capacities

Chain Box - Each Side 1.8 gal (US)

Cooling System 3.2 gal (US)

Engine Crankcase 2.6 gal (US)

Fuel Tank 15.1 gal (US)

Hydraulic System 11.9 gal (US)

Hydraulic Tank 9 gal (US)

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Outside Cab*** 102 dB(A)

Inside Cab** 83 dB(A)

Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Sustainability

The Cat® C2.2 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.