New 246D3 Skid Steer Loader For Sale in Georgia

Engine

Gross Power - SAE J1995 74.3 hp

Net Power - SAE 1349 72.9 hp

Displacement 203 in³

Stroke 4.7 in

Bore 3.7 in

Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf

Engine Model Cat C3.3B DIT (turbo)

Net Power - ISO 9249 73.7 hp

Net Flywheel Power 72.9 hp

Operating Specifications

Rated Operating Capacity 2200 lb

Tipping Load 4400 lb

Breakout Force - Tilt Cylinder 7355 lb

Rated Operating Capacity with Optional Counterweight 2410 lb

Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Weights

Operating Weight 7478 lb

Dimensions

Wheel Base 49.2 in

Height - Top of Cab 83.1 in

Vehicle Width over Tires 66 in

Ground Clearance 8.9 in

Departure Angle 26°

Maximum Dump Angle 39°

Bumper Overhang - Behind Rear Axle 42.6 in

Rack Back Angle - Maximum Height 96°

Length - Without Bucket 117.8 in

Maximum Overall Height 158.7 in

Maximum Reach - With Arms Parallel to Ground 54.6 in

Length - With Bucket on Ground 146 in

Turning Radius from Center - Coupler 55.2 in

Bucket Pin Height - Carry Position 7.9 in

Bucket Pin Height - Maximum Lift 124.2 in

Clearance at Maximum Lift and Dump 97.1 in

Turning Radius from Center - Bucket 85.9 in

Turning Radius from Center - Machine Rear 71.2 in

Reach - Maximum Lift/Dump 23.6 in

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 hp

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 hp

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - One Speed 7.7 mile/h

Travel Speed - Forward or Reverse - Two Speed Option 11 mile/h

Service Refill Capacities

Chain Box - Each Side 3.3 gal (US)

Cooling System 3.7 gal (US)

Engine Crankcase 3 gal (US)

Fuel Tank 27.7 gal (US)

Hydraulic System 13.7 gal (US)

Hydraulic Tank 10.3 gal (US)

Noise Level

Inside Cab* 81 dB(A)

Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Outside Cab** 101 dB(A)

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

A Smooth Ride

A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. (Photo shown may vary from machine referenced.)

Sustainability

The Cat® C3.3B engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.