New 272D3 XE Skid Steer Loader For Sale in Georgia

Engine

Gross Power - SAE J1995 110 hp

Net Power - SAE 1349 106 hp

Displacement 232 in³

Stroke 4.7 in

Bore 3.9 in

Net Flywheel Power 106 hp

Engine Model Cat C3.8 DIT (turbo)

Net Power - ISO 9249 107 hp

Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf

Operating Specifications

Rated Operating Capacity 3700 lb

Tipping Load 7400 lb

Breakout Force - Tilt Cylinder 7362 lb

Breakout Force - Lift Cylinder 6085 lb

Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).

Rated Operating Capacity with Optional Counterweight 3950 lb

Weights

Operating Weight 9573 lb

Dimensions

Wheel Base 54.6 in

Height - Top of Cab 84 in

Vehicle Width over Tires 76 in

Ground Clearance 10.4 in

Departure Angle 28°

Maximum Dump Angle 51°

Bumper Overhang - Behind Rear Axle 46.2 in

Turning Radius from Center - Machine Rear 74.7 in

Length - Without Bucket 127 in

Reach - Maximum Lift/Dump 29 in

Clearance at Maximum Lift and Dump 97.4 in

Bucket Pin Height - Maximum Lift 128.6 in

Bucket Pin Height - Carry Position 9.3 in

Turning Radius from Center - Coupler 57.7 in

Bucket Pin Reach - Maximum Lift 13.5 in

Rack Back Angle - Maximum Height 84°

Maximum Overall Height 161.5 in

Length - With Bucket on Ground 155 in

Maximum Reach - With Arms Parallel to Ground 49.1 in

Turning Radius from Center - Bucket (racked) 90.6 in

Roll Back Angle 28°

Hydraulic System

Standard Flow Mode - Loader Hydraulic Pressure 3335 psi

Standard Flow Mode - Hydraulic Power - Calculated 44 hp

Standard Flow Mode - Loader Hydraulic Flow 23 gal/min

Note *When equipped with Cat 400 Series work tools.

Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061 psi

Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40 gal/min

Hydraulic Flow - XE - Hydraulic Power (calculated) 94 hp

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - One Speed 7.2 mile/h

Travel Speed - Forward or Reverse - Two Speed 10.3 mile/h

Service Refill Capacities

Cooling System 4.1 gal (US)

Engine Crankcase 3.5 gal (US)

Fuel Tank 31.7 gal (US)

Hydraulic System 14.5 gal (US)

Hydraulic Tank 10.3 gal (US)

Chain Box - Each Side 2.7 gal (US)

Diesel Exhaust Fluid (DEF) Tank 5 gal (US)

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Outside Cab*** 104 dB(A)

Inside Cab** 83 dB(A)

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

A Smooth Ride

A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. (Photo shown may vary from machine referenced.)

Industry Leading Hydraulic Power

The 272D3 XE hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools.

Sustainability

The Cat® C3.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.