New 621 Wheel Tractor-Scraper For Sale in Georgia
Yancey Brands
Hotlines
621 Wheel Tractor-Scraper
621 Wheel Tractor-Scraper
621 Wheel Tractor-Scraper
621 Wheel Tractor-Scraper

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Get Pricing
Call 877-OWNACAT
BUY Used Rent
General
Overall Shipping Height 13.22 ft
Overall Width 11.75 ft
Scraper Capacity - Heaped 24 yd³
Fuel Tank Refill Capacity - Scraper 216.1 gal (US)
Tires - Scraper 33.25R29**E3
Width - Cut 10.3 ft
Maximum Depth of Spread 21.3 in
Top Speed - Loaded 33.5 mile/h
Rated Load 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
180° Curb-to-Curb Turning Width 38.71 ft
Scraper Capacity - Struck 17.1 yd³
Maximum Depth of Cut 12.4 in
Tires - Tractor Drive 33.25R29**E3
Engine Model - Tractor Cat C13
Flywheel Power - Tractor 407 hp
Note Cat C13 engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
Rated Engine RPM - Tractor 2000 r/min
Flywheel Power - Tractor/Scraper 304 kW (407 hp)
Scraper Capacity - Heaped 24 yd³
Top Speed - Loaded 33.5 mile/h
Hydraulic System 21.926 gal (US)
Crankcase 8.08 gal (US)
Transmission System 24.76 gal (US)
Cooling System 11.89 gal (US)
Fuel Tank 216.09 gal (US)
Diesel Exhaust Fluid 8.057 gal (US)
Width - Overall Machine 141.1 in
Width - Tractor 133.1 in
Width - Inside of Bowl 120 in
Width - Outside Rear Tires 128.9 in
Height - Overall Shipping 158.6 in
Height - Top of Cab 142.2 in
Ground Clearance - Tractor 21.9 in
Front of Tractor to Front Axle 122.8 in
Axle to Vertical Hitch Pin 21.3 in
Height - Scraper Blade Maximum 20.5 in
Wheel Base 314.9 in
Rear Axle - Rear of Machine 114.1 in
Length - Overall Machine - Standard 551.8 in
Length - Maximum (Push-Pull) 613.2 in
Width - Overall Machine - Ladder Down 149.2 in
Width - Rear Tire Centers 90.2 in
Operating Weight - Empty 79787 lb
Overall Length 45.9 ft
Overall Length - With Bail Down 51.1 ft
Operating Weight - Empty 80630 lb
Exterior Sound Level The exterior sound power level for the standard machine (ISO 6393:2008) is 118 dB(A).
ROPS/FOPS Meets SAE and ISO standards
Rollover Protection Structure (ROPS) ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Brakes ISO 3450:1996
Reverse Alarm ISO 9533:2010
Falling Object Protective Structure (FOPS) ISO 3449:2005 Level II
Seat Belt SAE J386:JUN1985
Steering System ISO 5010:2007
Transmission Gear - Seventh 24.8 mile/h
Transmission Gear - Fifth 13.6 mile/h
Transmission Gear - First 3.1 mile/h
Transmission Gear - Sixth 18.4 mile/h
Transmission Gear - Second 5.5 mile/h
Transmission Gear - Third 7.5 mile/h
Transmission Gear - Fourth 10.1 mile/h
Transmission Gear - Eighth 33.5 mile/h
Transmission Gear - Reverse 5.7 mile/h
Apron Raise 2.95 s
Bowl Raise 3 s
Ejector Retract 6.7 s
Bowl Lower 3.5 s
Apron Lower 3.8 s
Ejector Extend 5.2 s
Bail Lower 3.2 s
Bail Raise 1.8 s
BE MORE PRODUCTIVE

  • Up to 8% improvement in productivity.
  • Advanced Productivity Electronic Control System (APECS) allows
    the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power
    and torque the engine is producing. The net result is moving more
    material.
  • Use Ground Speed Control to set the desired top speed and the
    machine will find the gear that works best for the engine and the
    transmission, providing a lower fuel burn.
  • The Machine Speed Limit feature replaces Top Gear Selection.
  • Auto-Stall assists in quickly bringing the transmission to an
    operating temperature at start-up when the machine is working in a
    cold climate region.
  • Boost productivity with the Payload Estimator feature (optional
    attachment). Payload Estimator is an automatic feature when
    ordered with Sequence Assist.
  • Cat®Payload Estimator for scrapers is an earthmoving solution for
    optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the
    loaded haul segment. Payload Estimator is optimized to be used
    with Sequence Assist, which provides increased productivity with
    less operator effort.

        
  • Reduce up to 14 individual operator commands per cycle with Sequence Assist (optional attachment).
    •     
  • Steer with less effort using the newly designed high-pressure 
    steering system.
    •     
  • Enjoy interior improvements and a more ergonomic work environment
     with a 21% larger cab than the G Series cab.
    •     
  • Intuitive, ergonomic controls keep operators focused on their work.
    •     
  • Maintain desired cab temperature with automatic temperature 
    control.

  • Get in and out of the cab easier with the new powered access
    ladder system (optional attachment).
  • Enhance an operator’s awareness of site surroundings with the
    optional Work Area Vision System (WAVS).
  • Seat belt indicator provides visual and audible alerts when the seat
    belt is not in use.
  • Advanced Cushion Hitch allows the cushion hitch to prevent end
    stroke by having the ability to predict end stroke events and manage
    the rate of dampening, resulting in reduced hitch maintenance and
    improved operator ride in rough conditions.

  • The spacious cab features easy, intuitive controls and excellent
    visibility. The cab provides a comfortable working environment for
    all-day operation.
  • Cat Advanced Ride Management (ARM) seat suspension reduces
    end stroke movement of the load cylinder for a smoother ride.
  • Engine overspeed protection will automatically engage with no
    operator input when the machine is in eighth gear. The machine
    will assist in slowing the machine speed by canceling the throttle
    command and engaging the engine compression brake.

  • Monitor, manage, and enhance jobsite operations.
  • Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
  • Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
  • Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your jobsite.
  • Shorten the learning curve for inexperienced operators with Load Assist (optional attachment).

  • The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
  • The Cat C13 tractor engine meets U.S. EPA Tier 4 Final or EU Stage V emission standards, contributing to lower fuel consumption.
  • Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
  • Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.

Similar Models