New 304 Mini Excavator For Sale in Georgia

Engine

Gross Power - ISO 14396 48.4 hp

Net Power 45 hp

Engine Model C1.7 Turbo

Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 45 hp

Bore 3.3 in

Stroke 3.9 in

Displacement 101 in³

Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.

Weights

Operating Weight 9867 lb

Minimum Operating Weight with Canopy* 8655 lb

Maximum Operating Weight with Canopy** 9647 lb

Minimum Operating Weight with Cab* 8875 lb

Maximum Operating Weight with Cab** 9867 lb

Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.

Note (2) **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.

Weight Increase from Minimum Configuration

Counterweight 496 lb

Long Stick 66 lb

Steel Tracks 430 lb

Angle Blade 243 lb

Travel System

Travel Speed - High 3.2 mile/h

Travel Speed - Low 2.2 mile/h

Maximum Traction Force - High Speed 4271 lbf

Maximum Traction Force - Low Speed 7329 lbf

Ground Pressure - Minimum Weight 4.2 psi

Ground Pressure - Maximum Weight 4.9 psi

Gradeability - Maximum 30 degrees

Service Refill Capacities

Cooling System 2.9 gal (US)

Engine Oil 1.6 gal (US)

Fuel Tank 17 gal (US)

Hydraulic Tank 14 gal (US)

Hydraulic System 17 gal (US)

Hydraulic System

Type Load Sensing Hydraulics with Variable Displacement Piston Pump

Pump Flow at 2,400 rpm 25 gpm

Operating Pressure - Equipment 3553 psi

Operating Pressure - Travel 3553 psi

Operating Pressure - Swing 2611 psi

Auxiliary Circuit - Primary - Flow 21 gpm

Auxiliary Circuit - Primary - Pressure 3553 psi

Auxiliary Circuit - Secondary - Flow 7 gpm

Auxiliary Circuit - Secondary - Pressure 3553 psi

Digging Force - Stick - Standard 4721 lbf

Digging Force - Stick - Long 4316 lbf

Digging Force - Bucket 8588 lbf

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Swing System

Machine Swing Speed 9 r/min

Boom Swing - Left 78 Degrees

Boom Swing - Right 50 Degrees

Blade

Straight Blade Width 66.9 in

Straight Blade Height 14.2 in

Angle Blade Width 66.9 in

Angle Blade Height 14.2 in

Angle Blade - Left 25 Degrees

Angle Blade - Right 25 Degrees

Certification - Cab and Canopy

Roll Over Protective Structure (ROPS) ISO 12117-2:2008

Top Guard ISO 10262:1998 (Level I)

Dimensions - Standard Stick

Dig Depth 126.4 in

Vertical Wall 94.3 in

Maximum Reach - Ground Level 204.7 in

Maximum Reach 209.8 in

Maximum Dig Height 198.4 in

Maximum Dump Clearance 143.5 in

Boom In Reach 88.8 in

Tail Swing without Counterweight 47.4 in

Tail Swing with Counterweight 51.2 in

Maximum Blade Height 16.5 in

Maximum Blade Depth 18.7 in

Boom Height - Shipping Position 63.8 in

O/A Shipping Height 100 in

Swing Bearing - Height 21.9 in

O/A Undercarriage Length 87 in

Overall Shipping Length* 194.9 in

Boom Swing - Right 28.7 in

Boom Swing - Left 20.9 in

Track Belt/Shoe Width 13.8 in

Ground Clearance 12 in

Stick Length 54.9 in

Note *Overall Shipping Length depends on blade position during shipment.

Dimensions - Long Stick

Dig Depth 138.2 in

Vertical Wall 99.8 in

Maximum Reach - Ground Level 214.4 in

Maximum Reach 219.3 in

Maximum Dig Height 201.8 in

Maximum Dump Clearance 147.2 in

Boom In Reach 92.1 in

Tail Swing without Counterweight 47.4 in

Tail Swing with Counterweight 51.2 in

Maximum Blade Height 16.5 in

Maximum Blade Depth 18.7 in

Boom Height - Shipping Position 75.2 in

O/A Shipping Height 100 in

Swing Bearing - Height 21.9 in

O/A Undercarriage Length 87 in

Overall Shipping Length* 194.9 in

Boom Swing - Right 28.7 in

Boom Swing - Left 20.9 in

Track Belt/Shoe Width 13.8 in

Track Width 66.9 in

Ground Clearance 12 in

Stick Length 66.7 in

Note *Overall Shipping Length depends on blade position during shipment.

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1.65 lb), 0.90 kg (1.98 lb) or 1.0 kg (2.20 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons) for R134a and 0.001 tonnes (0.001 tons) for R1234yf (Europe).

Sound

Operator Sound Pressure (ISO 6396:2008) 76 dB(A)

Average Exterior Sound Pressure (ISO 6395:2008) 97 dB(A)

Note European Union Directive “2000/14/EC”

Sustainability

Recyclability 96%

ALL DAY COMFORT

Choose either a canopy (not available in some regions) or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped as an upgrade option.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A SMALL MACHINE

Strong lift and dig performance helps you get the job done faster. The reduced radius tail swing design provides exceptional stability and performance. With a maximum width of 1700 mm (67 in), the 304 can access those hard to get into areas. Dozer float allows for easy clean up. An angle blade is also an option for finished grading and easier backfilling applications.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY

The Cat® C1.7 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)