New 307.5 Mini Hydraulic Excavator For Sale in Georgia

Engine

Net Power 54.8 hp

Displacement 148 in³

Gross Power - SAE J1995 57.9 hp

Bore 3.4 in

Stroke 4 in

Rated Net Power - 2,400 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 54.8 hp

Engine Model Cat C2.4 Turbo

Weights

Operating Weight 17905 lb

Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.

Maximum Operating Weight with Cab** 17905 lb

Minimum Operating Weight with Cab* 16549 lb

Note (1) *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.

Dimensions - Long Stick

Dig Depth 182.8 in

Cab Height 100 in

Maximum Blade Height 14.6 in

Track Belt/Shoe Width 17.7 in

Maximum Dump Clearance 225.1 in

O/A Undercarriage Length 108.7 in

O/A Track Width 86.6 in

Vertical Wall 161.9 in

Width over Upper House 88.6 in

Boom In Reach 88.6 in

Stick Length 86.9 in

Tail Swing with Counterweight 76 in

Maximum Reach 267.9 in

Ground Clearance 14.6 in

Swing Bearing - Height 29.7 in

Tail Swing without Counterweight 70.9 in

Maximum Dig Height 305.7 in

Maximum Blade Depth 16 in

Maximum Reach - Ground Level 262.6 in

Height - Boom Transport - No Tools 100.4 in

Overall Shipping Length - without Counterweight 240.9 in

Overall Shipping Length - with Counterweight 246.1 in

Note (1) Boom Height when stick is pinned in transport position with no attachments.

Height - Boom Working - With Tools 124 in

Note (2) Boom Height when stick is pinned in working position with attachments.

Weight Increase from Minimum Configuration

Long Stick 181 lb

Counterweight 552 lb

Steel Tracks with Pads 628 lb

Travel System

Maximum Traction Force - Low Speed 14035 lb

Maximum Traction Force - High Speed 5856 lb

Travel Speed - High 3.1 mile/h

Ground Pressure - Maximum Weight 5.5 psi

Travel Speed - Low 1.9 mile/h

Gradeability - Maximum 30 degrees

Ground Pressure - Minimum Weight 5.1 psi

Service Refill Capacities

Cooling System 2.6 gal (US)

Hydraulic System 29 gal (US)

Hydraulic Tank 14 gal (US)

Fuel Tank 38 gal (US)

Engine Oil 2.5 gal (US)

Hydraulic System

Type Load Sensing Hydraulics with Variable Displacement Piston Pump

Operating Pressure - Swing 3626 psi

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Pump Flow at 2,400 rpm 44 gal/min

Digging Force - Stick - Standard 8504 lb

Operating Pressure - Travel 4134 psi

Operating Pressure - Equipment 4134 psi

Digging Force - Stick - Long 7579 lb

Digging Force - Bucket 12272 lb

Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min

Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi

Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min

Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi

Swing System

Machine Swing Speed 10 r/min

Blade

Height 17 in

Width 90 in

Certification - Cab

Roll Over Protective Structure (ROPS) ISO 12117-2:2008

Top Guard ISO 10262:1998 (Level I)

Tip Over Protective Structure (TOPS) ISO 12117:1997

Sound

Operator Sound Pressure (ISO 6396:2008) 72 dB(A)

Average Exterior Sound Pressure (ISO 6395:2008) 98 dB(A)

Note European Union Directive “2000/14/EC”

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains .90 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.

Dimensions - Standard Stick

Tail Swing with Counterweight 76 in

Vertical Wall 141.6 in

Tail Swing without Counterweight 70.9 in

Stick Length 65.6 in

Boom In Reach 66.2 in

Track Belt/Shoe Width 17.7 in

Ground Clearance 14.6 in

O/A Track Width 86.6 in

Maximum Reach - Ground Level 242.1 in

O/A Undercarriage Length 108.7 in

Width over Upper House 88.6 in

Maximum Reach 247.9 in

Swing Bearing - Height 29.7 in

Maximum Blade Height 14.6 in

Maximum Blade Depth 16 in

Dig Depth 161.4 in

Maximum Dump Clearance 208.6 in

Cab Height 100 in

Maximum Dig Height 289.3 in

Height - Boom Working - With Tools 107.5 in

Overall Shipping Length - with Counterweight 245.3 in

Note (2) Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.

Overall Shipping Length - without Counterweight 240.2 in

Height - Boom Transport - No Tools 101.2 in

Note (1) Boom Height when stick is pinned in transport position with no attachments.

Sustainability

Recyclability 96%

ALL DAY COMFORT

A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A MINI DESIGN

Increased lifting, swinging, travel and multi-functioning performance helps you get the job done more efficiently, and blade float allows for easy grading.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C2.4 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)