New 903D Compact Wheel Loader For Sale in Georgia

Buckets

Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3)

Bucket Capacities - General Purpose 0.6 m3 (0.8 yd3)

Bucket Capacities - Light Material 1.0 m3 (1.3 yd3)

Engine

Maximum Gross Power 42 hp

Engine Model Cat C2.4*

Gross Power 42 hp

Net Power - 2,200 rpm - SAE J1349 R-ing 40 hp

Net Power - 2,200 rpm - ISO 9249 R-ing 40 hp

Bore 3.4 in

Stroke 4 in

Displacement 147 in²

Note *Engine meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight 9414 lb

Transmission

Travel Speed 12.4 mile/h

Hydraulic System

Main Relief 3481 psi

3rd Auxiliary Flow 14 gal/min

Hydraulic Cycle Time - Lower, Float 2.4 s

Loader Hydraulic System

Hydraulic Cycle Time - Lift 4.4 s

Hydraulic Cycle Time - Dump 0.7 s

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level I

Service Refill Capacities

Cooling System 3 gal (US)

Fuel Tank 11.4 gal (US)

Hydraulic System 6.3 gal (US)

Engine Oil 2.4 gal (US)

Dimensions (Approximate) - Standard Lift

Cab Height 8.25 ft

Ground Clearance 10 in

Wheel Base 6.42 ft

Overall Length - With Bucket* 15.75 ft

Reach at Maximum Dump Height* 2.33 ft

Dig Depth 6 in

Maximum Dump Height* 7.5 ft

Load Over Height 9.17 ft

Hinge Pin at Maximum Height 10.08 ft

Departure Angle - Degrees 30°

Overall Length - With Forks 17.08 ft

Reach - Ground Level 2.67 ft

Maximum Reach 4.5 ft

Fork Depth Above Ground 2 in

Fork Height at Maximum Reach 4.67 ft

Maximum Fork Height 9.83 ft

Fork Reach at Maximum Height 2 ft

Turning Radius - Over Bucket* 13.17 ft

Turning Radius - Inside Tire** 5.92 ft

Width - Over Bucket* 5.83 ft

Tire Gauge 4.33 ft

Machine Width** 5.58 ft

Articulation Angle 40°

Steering Angle 80°

Dump Angle at Maximum Height 40°

Note (1) *Vary with bucket size.

Note (2) **Vary with tire size.

Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.

Dimensions (Approximate) - High Lift

Cab Height 8.25 ft

Ground Clearance 10 in

Wheel Base 6.42 ft

Overall Length - With Bucket* 16.17 ft

Reach at Maximum Dump Height* 2.42 ft

Dig Depth 8 in

Maximum Dump Height* 8 ft

Load Over Height 9.67 ft

Hinge Pin at Maximum Height 10.58 ft

Departure Angle - Degrees 30°

Overall Length - With Forks 17.58 ft

Reach - Ground Level 3.25 ft

Maximum Reach 4.92 ft

Fork Depth Above Ground 2 in

Fork Height at Maximum Reach 4.67 ft

Maximum Fork Height 10.33 ft

Fork Reach at Maximum Height 2 ft

Turning Radius - Over Bucket* 13.42 ft

Turning Radius - Inside Tire** 5.92 ft

Width - Over Bucket* 5.83 ft

Tire Gauge 4.33 ft

Machine Width** 5.58 ft

Articulation Angle 40°

Steering Angle 80°

Dump Angle at Maximum Height 40°

Note (1) *Vary with bucket size.

Note (2) **Vary with tire size.

Operating Specifications - Standard Lift

Tire Size 33 × 15.5-16.5, 12 PR

Rated Bucket Capacity 0.8 yd³

Breakout Force 6160 lbf

Operating Weight 9414 lb

Rated Operating Load at Full Turn - Bucket*** 2701 lb

Straight Tipping Load - Bucket*** 6415 lb

Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401 lb

Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512 lb

Rack Back - Transport Position 51°

Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3366 lb

Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2524 lb

Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.

Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

Note (3) ***Manual quick coupler, precleaner hood.

Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.

Operating Specifications - High Lift

Tire Size 33 × 15.5-16.5, 12 PR

Rated Bucket Capacity 0.8 yd³

Breakout Force 6204 lbf

Operating Weight 9462 lb

Rated Operating Load at Full Turn - Bucket*** 2502 lb

Straight Tipping Load - Bucket*** 5975 lb

Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004 lb

Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115 lb

Rack Back - Transport Position 51°

Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3148 lb

Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2361 lb

Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.

Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

Note (3) ***Manual quick coupler, precleaner hood.

Maximum Material Densities - General Purpose

Bucket Type General Purpose

Rated Capacity 0.8 yd³

Dump Height 90 in

Maximum Material Density 3169 lb/yd³

Bucket Width 70 in

Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.

Maximum Material Densities - Light Material

Bucket Type Light Material

Rated Capacity 1.3 yd³

Dump Height 85 in

Maximum Material Density 1989 lb/yd³

Bucket Width 74 in

Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.

Sustainability

Recyclability 97%

Work Made Easy

The 903D Makes Work Easy with a 25% increase in tipping capacity to handle classic landscaping materials along with a 25% faster ground speed. The optional hydraulic Skid Steer Loader style coupler allows for changing work tools without getting out of the cab. Optional front and rear diff-lock can be activated on the fly, providing maximum traction in slick underfoot conditions.

Enjoy All Day Comfort

Operators will Enjoy All Day comfort with a new multi-function joystick, increased leg room, improved pedal positioning, easier entry/exit and optional speed sensitive ride control. The minimal engine overhang provides excellent rear and corner visibility, making the 903D easy to operate in confined areas.

Configured for Success

Configure the 903D for success with new options such as engine and ground speed control, ideally suited for hydro-mechanical work such as using a broom. With the addition of a Worktool Electrical Harness option, you can now run more tools than ever before. Two loader linkage options, standard and high lift, provide either improved capacity or improved lift height based on your application.

Simply Reliable

Fully opening rear hood allows easy access to the engine compartment featuring side-by-side coolers and transparent fuel/water separator with optional engine air precleaner and radiator screen for high debris applications. New rear tie down locations under the machine allow for easier transport, while a new engine oil fill location allows for easier access during engine oil changes.