New 914 Compact Wheel Loader For Sale in Georgia

Engine

Rated Net Power - Rated Engine Speed 2200 r/min

Maximum Gross Power - Rated Engine Speed 1800 r/min

Rated Net Power - SAE J1349 99 hp

Maximum Gross Power - ISO 14396 (metric) 112 hp

Rated Net Power - ISO 9249 98 hp

Maximum Gross Torque - SAE J1995 335 ft·lbf

Maximum Gross Torque - ISO 14396 332 ft·lbf

Maximum Net Torque - SAE J1349 329 ft·lbf

Maximum Net Torque - ISO 9249 327 ft·lbf

Displacement 220 in³

Bore 3.85 in

Stroke 4.72 in

Engine Model Cat C3.6

Emissions Engine meets Tier 4 Final/Stage V emission standards.

Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396 110 hp

Maximum Gross Power 110 hp

Buckets

Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)

Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Weights

Operating Weight 19103 lb

Steering

Maximum Flow - Steering Pump 22 gal/min

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s

Maximum Working Pressure - Steering Pump 3263 psi

Steering Articulation Angle - Each Direction 40 °

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi

Maximum Flow - Implement Pump 39 gal/min

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min

Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi

Hydraulic Cycle Time - Total Cycle Time 12.5 s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s

Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s

Relief Pressure - Tilt Cylinder 4931 psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min

Maximum Working Pressure - Implement Pump 4061 psi

Hydraulic Cycle Time - Rackback 2.2 s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s

Service Refill Capacities

Cooling System 5.7 gal (US)

Fuel Tank 43.6 gal (US)

Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Axles - Rear Center Differential 2 gal (US)

Hydraulic System - Including Tank 25.9 gal (US)

Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US)

Engine Crankcase 2.6 gal (US)

Hydraulic Tank 14.5 gal (US)

Transmission 0.8 gal (US)

Axles - Front Center Differential 2 gal (US)

Transmission

Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 3 25 mile/h

Forward and Reverse - Speed Range 1* 6.3 mile/h

Forward and Reverse - Speed Range 2* 12.5 mile/h

Tires

Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid

Note (1) Other tire choices are available. Contact your Cat dealer for details.

Standard Size 17.5 R25 L2 XTLA

Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005

Note (4) *The measurements were conducted with the cab doors and windows closed.

Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Axles

Rear Oscillating ±11 degrees; Locking differential (Standard)

Front Fixed; Locking differential (standard)

Sustainability

Recyclability 95%

Cat® C3.6 Engine

EU Stage V and U.S. EPA Tier 4 Final compliant.

Cat Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 914 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT), ISO (wide) and Fusion™ coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulics and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application. High Flow option allows for the use of even the most demanding work tools.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features

Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 914 both powerful and fuel efficient.

Sustainability

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
Match the wheel loader to the job using power modes including Eco Mode that reduces engine speed and hydraulic power for applications not requiring full hydraulic power - helping you to reduce fuel consumption and greenhouse gas emissions.
Programmable sensors and kickouts help you work quicker and more comfortable reducing wear on machine and the attachment