New 990 Wheel Loader For Sale in Georgia

Engine

Engine Model C27 Cat®

Rated Speed 1,800/min

Engine Power - ISO 14396 752 hp

Gross Power - SAE J1995 766 hp

Net Power - SAE J1349 - Standard Ambient 699 hp

Net Power - SAE J1349 - High Ambient 648 hp

Bore 5.4 in

Stroke 6 in

Displacement 1649.5 in³

Peak Torque - 1,200 rpm 2624 lb/ft

Torque Rise 18 %

Emissions U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent

Transmission

Transmission Type Cat planetary power shift

Forward - 1 4.5 mile/h

Forward - 2 8.3 mile/h

Forward - 3 14.2 mile/h

Reverse - 1 4.9 mile/h

Reverse - 2 9.1 mile/h

Reverse - 3 15.5 mile/h

Direct Drive - Forward 1 Lock-up disabled

Direct Drive - Forward 2 8.5 mile/h

Direct Drive - Forward 3 15.2 mile/h

Direct Drive - Reverse 1 5.4 mile/h

Direct Drive - Reverse 2 9.6 mile/h

Direct Drive - Reverse 3 16.4 mile/h

Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.

Operating Specifications

Operating Weight 178517 lb

Rated Payload - Standard 17.5 ton (US)

Rated Payload - High Lift 17.5 ton (US)

Bucket Capacity Range 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

Cat Truck Match - Standard 773-775

Cat Truck Match - High Lift 775-777

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit Positive flow control

Lift/Tilt System Variable displacement piston

Maximum Flow at 1,800 rpm (1) 240 gal/min

Cylinders, Double Acting - Lift, Bore and Stroke 235 mm × 1287 mm (9.3 in × 50.7 in)

Cylinders, Double Acting - Tilt, Bore and Stroke 292.1 mm × 820 mm (11.5 in × 32.3 in)

Pilot System Open loop and pressure reducing

Relief Valve Setting - Main 507 psi

Relief Valve Setting - Lift/Tilt 4786 psi

Hydraulic Cycle Times

Rack Back 4.3 s

Raise 8.2 s

Dump 2.9 s

Lower 3.7 s

Lower Float Down 3.6 s

Total Hydraulic Cycle Time - Empty Bucket 13.8 s

Hydraulic System - Steering

Steering System - Circuit Pilot, load sensing

Steering System - Pump Piston, variable displacement

Maximum Flow at 1,400 rpm 96.2 gal/min

Relief Valve Setting - Steering 5004 psi

Total Steering Angle 70°

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).

Axles

Front Fixed

Rear Trunnion

Oscillation Angle 8.5°

Brakes

Brakes ISO 3450: 2011

Service Refill Capacities

Fuel Tank 294.3 gal (US)

Cooling System 54.9 gal (US)

Engine Crankcase 20 gal (US)

Transmission 29.1 gal (US)

Differential - Final Drives - Front 71.6 gal (US)

Differential - Final Drives - Rear 68.9 gal (US)

Hydraulic System Factory Fill 210 gal (US)

Hydraulic Tank - Implement and Hydraulic Fan 68.9 gal (US)

Hydraulic Tank - Steering and Braking 34.9 gal (US)

Note All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) 65.5 dB(A)

Machine Sound Level (ISO 6395:2008) 115 dB(A)

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) 65.5 dB(A)

Machine Sound Level (ISO 6395:2008) 113 dB(A)

Buckets

Bucket Capacities 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

PROVEN RELIABILITY

Cat C27 engine is built and tested to meet your most demanding applications.
Longer engine life and improved fuel efficiency with reduced rated speed.
Designed for longer life, rebuildability, and higher resale value.
Maximum responsiveness with Steering and Integrated Control (STIC™).
Moves more material more efficiently with improved power and control.
Durable construction withstands the toughest loading conditions and multiple life cycles.

PERFORMANCE AND PRODUCTIVITY

Two engine emission options are available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent.
Up to 10% more payload per pass on truck-loading applications with Performance Series Buckets.
Payload increase to optimize pass on 775 trucks.
Positive Flow Control (PFC) hydraulic system increases efficiency, bucket feel, and responsiveness with consistent performance.
Excellent visibility to the bucket edges and work area through a Z-bar linkage.
Planetary power shift transmission for maximum uptime.
Convenient, responsive, electro-hydraulic controls increase operator productivity.
Superior digging, higher bucket fill factors, reduced dig times.
Integrated steering and transmission controls.
Operators can check tire pressure during operation with any change sending a fault code to VisionLink®, preventing premature tire failure.

POWERFUL EFFICIENCY

Up to 54% fuel efficiency material per gallon of fuel (27% less fuel consumption).
Economy mode for reduced rated engine speed and reduced fuel consumption.
Positive flow-control hydraulics for full flow on demand at lower engine speeds.
Engine Idle Shutdown for less fuel used while idling.
Fully integrated electronic engine controls make your fuel go farther.

PRODUCTIVITY WITH TECHNOLOGY

Developed to monitor, manage, and enhance your jobsite operations.
Payload provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
Detect enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the jobsite.
VisionLink wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business.
Gain valuable insight into how your machine or fleet is performing.
Optional Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

*Not legal for trade

SAVE ON SERVICE AND MAINTENANCE

10% lower maintenance costs.
Grouped service points.
Electro-hydraulic controls.
Swing-out engine compartment service doors.
Ecology drains to prevent spilled contaminants.
Ground level access to transmission control valves.
Vehicle Information Management System (VIMS™) notifications to resolve problems before failure.
Longer life, rebuildability, and high resale value.

SAFETY FIRST

Standard stairway lighting.
Left- and right-hand stairs with 45-degree angle.
Standard Cat Vision, rear vision camera system.
Pressurized cabin with filtered and reduced sound levels.

OPERATOR COMFORT AND CONTROL

Best-in-class operator comfort and ergonomics.
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion.
Easy-to-reach levers and controls with seat-mounted implement pod to reduce fatigue.
Ergonomic switch placement and displays with large backlit switches, LED indicators, and ISO symbols.
Optional heated mirrors.
Two-position rocker switch activates the electro-hydraulic parking brake.
Reduced vibrations from isolated cab mounts and seat air suspension.
Automatic cab temperature controls.
Achieve precise positioning for easy loading in tight areas with 35 degrees of steering articulation.
Precise machine control by load-sensing hydraulic steering system.

PURPOSE BUILT SPECIALTY MODELS - MILLYARD

Designed to meet the demands of millyard applications.
Designed for durability, ensuring availability in multiple life cycles.
Equipped with Economy Mode to save on fuel consumption by the use of On Demand Throttle.
Equipped with Impleller Clutch Torque Convereter (ICTC) and Rimpull Control System (RCS) to reduce tire slippage and fuel efficiency.
Full hydraulic flow down to 1,400 engine rpm by using hydraulic flow sharing technology.
Equipped with 45 degree angle access ladders and standard Cat Vision for enhanced safety.
Cat forks are designed for maximum productivity and durability.
Integrates front camera mounting location for maximum visibility to the entire fork tips during truck unloading.

PURPOSE BUILT SPECIALTY MODELS - STEEL MILL

World class safety, operator comfort and efficiency in pit digging and skull handling applications.
Efficiency of manual throttle and ergonomics of throttle lock.
Excellent visibility to the bucket edges and work area through a Z-bar design.
Equipped with extra heat protection to key hoses and harnesses for improved reliability.

LONG TERM VALUE AND DURABILITY

Best-in-class transmission for long life and consistent, smooth shifting; specifically designed for mining applications.
Advanced filtration system for extended performance and reliability of the hydraulic system.
Advanced Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) reduce tire slippage and wear, improve fuel efficiency, and reduce cost-per-ton.
Linkage pin joints have optional auto-lube system to ensure long life.
Frame resists torsional shock and twisting forces.
Heavy-duty steering cylinder mounts and axle mounting ensure increased structural integrity.